home *** CD-ROM | disk | FTP | other *** search
/ Experimental BBS Explossion 3 / Experimental BBS Explossion III.iso / gus / digestv5.zip / V5N19.TXT < prev    next >
Text File  |  1993-08-20  |  13KB  |  327 lines

  1.  
  2.  
  3.  
  4.  
  5.  
  6. Ultrasound Daily Digest     Fri Aug 20 00:45     Volume 5: Issue  19  
  7.  
  8. Today's Topics:
  9.              Any utils out there to test .mid integrity?
  10.                             Good Joystick
  11.                         MCS Stereo and the GUS
  12.                             Midi problems
  13.                        NMI PROBLEMS, GRAVIS, RE
  14.                     Ultrasound Daily Digest V5 #18
  15.  
  16. Standard Info:
  17.     - Meta-info about the GUS can be found at the end of the Digest.
  18.     - Before you ask a question, please READ THE FAQ.
  19.  
  20. ----------------------------------------------------------------------
  21.  
  22. Date: Thu, 19 Aug 93 15:23:43 PDT
  23. From: ascott@pcocd2.intel.com (Andy Scott - IMD ~)
  24. Subject: Any utils out there to test .mid integrity?
  25. Message-ID: <9308192223.AA27622@fiw128>
  26.  
  27. Hi, had my GUS up and running a week now.
  28.  
  29. Question #1: Is there a way to test the integrity of .mid files without
  30. playing them?
  31.  
  32.  I had accidently forgotten to set mode to binary before ftp'ing a few
  33. mids and corrupted them. I ended up using the GUS playmidi utility
  34. from the DOS command command line, which would report something like
  35. <Mtrk corrupted ...> and dump me back to the DOS command prompt.
  36.  
  37. Question #2: Playmidi's different succeptibility to corrupt midi files
  38. depending how invoked.  As explained above, my cheers.mid was corrupted.
  39.  
  40. > playmidi cheers       
  41. reported the corruption but returned me safely to the DOS command line.
  42.  
  43. > playmidi
  44. then selecting cheers from the menu system, reported the corruption,
  45. then hung my PC.
  46.  
  47. Is this a bug?
  48.  
  49. Thanks,
  50. Andy Scott
  51.  ------------------------------------------------------------
  52. The opinions expressed herein are mine, *not* Intel's.
  53. Andrew M. Scott               Intel Corporation, M/S FM2-49
  54. ascott@pcocd2.intel.com       1900 Prairie City Road
  55. Voice: (916) 356-6369         Folsom, CA 95630-9599, USA
  56. Fax:   (916) 356-2219
  57.  
  58. ------------------------------
  59.  
  60. Date: Fri, 20 Aug 1993 00:18:53 -0500
  61. From: Mark joseph Hemelgarn <mhemelga@etsun.tech.iupui.edu>
  62. Subject: Good Joystick
  63. Message-ID: <199308200518.AA20988@etsun.tech.iupui.edu>
  64.  
  65. >From: CiabattO@esc.syr.ge.com
  66. >Subject: Search for Good joystick
  67.  
  68.     I use a Advanced Gravis Game Pad (Mhh, what any interesting choice!) 
  69. for games. It works well plugged into the game port on the GUS and with ultrajoy
  70. (Well it should. It was made by Gravis). I have had it for 9 months and have beem using it with the GUS for 3 months and have never had any problems what so ever with its performance. Some games even support it directly (Wolfstein, SOD).
  71.     I highly recommend the Gravis Game Pad for serious game playing.
  72.  
  73. A Happy and Proud GUS owner
  74. Mjhemelg@indyvax.iupui.edu
  75.  
  76. ------------------------------
  77.  
  78. Date: Thu, 19 Aug 1993 15:13:18 -0700 (PDT)
  79. From: briana@tau-ceti.isc-br.com (Brian W. Antoine)
  80. Subject: MCS Stereo and the GUS
  81. Message-ID: <m0oTIET-0000PFC@tau-ceti.isc-br.com>
  82.  
  83. > Date: Wed, 18 Aug 93 15:56:08 +0200
  84. > From: eralh@eras70.ericsson.se (Lars Hansson R/UP)
  85. > Subject: Re: MSC Stereo & GUS
  86. > Message-ID: <9308181356.AA06840@eras70>
  87. > If you want to use MSC stereo with your GUS you need an update from 
  88. > Animotion. According to the manula you are supposed to be able to reach them on CI$, bau I havent found them there. The best way of obtaining the update is to 
  89. > call their BBS at (205) 591 57 95 (or 57 15, Im not sure which is the the 
  90. > voice and which is the data one).
  91.  
  92.   Try the 'animotion' area on compuserve, the updated driver is called 
  93. gravis.zip and is in the library area.  It provides the ability to alter the
  94. synth and wave output levels, but has a few minor problems still.  The
  95. level meter doesn't work yet and you have to disable the CD player polling
  96. for the current time.  If you don't, any DOS window you open will cause
  97. windows to abort or crash.  Once it's disabled, it works fine.
  98.  
  99. -- 
  100. Brian W. Antoine   --------|        "Most sane people try to avoid annoying
  101. Olivetti North AM   ||   *             wizards, what's your excuse?"
  102. E. 22425 Appleway   ||   |/\
  103. Spokane, WA 99220   ||   `7l==  *  *  *  *  *  *  *  (*)            "Ribbit!"
  104.                    ====  / l   briana@tau-ceti.isc-br.com
  105.  
  106. ------------------------------
  107.  
  108. Date: Fri, 20 Aug 1993 00:36:25 -0500 (CDT)
  109. From: Jerilyn Daniello <jerilyn@tenet.edu>
  110. Subject: Midi problems
  111. Message-ID: <Pine.3.03.9308200023.A11257-a100000@abernathy.tenet.edu>
  112.  
  113. I'm having a little difficulty with my new gravis midi adaptor.  In dos it
  114. works just dandy, but in windows with sequencers like Cakewalk or
  115. Recording Session, although I can see the note on event is being passed
  116. from my synth to the midi box (because of those nifty LED lights on the
  117. gravis box), every so often the note isn't captured by the computer.  This
  118. is happening too frequently to ignore and I'm becoming a little frustrated
  119. by the lack of response.  My machine is a 386sx 20 mhz, which I know isn't
  120. all that fast, but it shouldn't be missing notes like this should it? 
  121. I'm not exactly multitasking while I compose. Has anyone else had similiar
  122. problems?
  123.  
  124. ------------------------------
  125.  
  126. Date: Thu, 19 Aug 93 15:31:53 
  127. From: matthew.arbeid@gravis.com
  128. Subject: NMI PROBLEMS, GRAVIS, RE
  129. Message-ID: <9308191531.A3009wk@gravis.com>
  130.  
  131. We at Advanced Gravis feel that the potential problems caused by non-standard
  132. computers warrant this message.
  133.  
  134. The following excerpt is from a letter received from the Intel Corporation
  135. dated August 18th, 1993, which confirms the standard guidelines for PC
  136. motherboard implementation of the Non Maskable Interrupt (NMI), function.
  137.  
  138. <<< Excerpt Starts >>>
  139.  
  140. ...Further to our conversation of last week, I would like to state Intel's
  141. position on the use of NMI in PC motherboard designs.  There is no technical
  142. reason not to use the NMI input on any of Intel's CPU products.  As I'm sure
  143. you are aware, NMI is used in an IBM AT compatible design to signal memory
  144. parity errors for motherboard memory and also to signal bus I/O errors
  145. via the IOCHK pin on the ISA bus.  All of Intel's PC chipsets, motherboard
  146. products, and design examples use NMI in this manner - to do otherwise
  147. risks compatibility with the de facto industry PC standard...
  148.  
  149. <<< Excerpt Ends >>>
  150.  
  151. At this time Advanced Gravis is attempting to contact the designers and
  152. manufactures of NMI faulted motherboards.  We're doing our best to make
  153. manufactures of flaky boards aware of standard design requirements, but...
  154. we need your help.
  155.  
  156. If you are using the GUS with software versions 2.05 and higher and you are
  157. receiving the "The NMI procedure on this P.C. has been disabled" error you
  158. can help us by e-mailing the following information to our NMI box,
  159. (nmi@gravis.com), or contact John Spak of Advanced Gravis Computer
  160. Technologies at +1 604 431-5020 ext: 1090.
  161.  
  162. 1)      The brand name of your computer.
  163. 2)      The processor and speed of your computer.
  164. 3)      The motherboard make and model of your computer.
  165. 4)      The name and number of the company you purchased your
  166.         computer from.
  167. 5)      Your name and phone number or e-mail address.
  168.  
  169.  
  170. Matthew
  171. Advanced Gravis Tech Support Group
  172.  
  173. matthew@gravis.com
  174.  
  175. ---
  176.  ~ QMPro 1.0 05-8925 ~ Advanced Gravis...it's not job, it's an adventure.
  177.  
  178. ------------------------------
  179.  
  180. Date: Thu, 19 Aug 1993 21:59:22 -0400 (EDT)
  181. From: Phat H Tran <ptran@sciborg.uwaterloo.ca>
  182. Subject: Re: Ultrasound Daily Digest V5 #18
  183. Message-ID: <Pine.3.05.9308192121.A8725-d100000@sciborg>
  184.  
  185. > Date: Wed, 18 Aug 1993 20:54:29 -0400 (EDT)
  186. > From: dionf@ERE.UMontreal.CA (Francois Dion)
  187. > Subject: A few more patches
  188. > Message-ID: <9308190054.AA08840@brise.ERE.UMontreal.CA>
  189. > On archive.epas.utoronto.ca, you can find:
  190. >
  191. [...] 
  192. > guns.zip, are 2  .38 pistols and a machine gun (big, like a manual gattling).
  193. > The .38 is intended to replace instrument 127, which is supposed to be a
  194. > gunshot.
  195.  
  196. Sound effects in games under Mega-Em are a lot better now that I have a
  197. proper gunshot.  
  198.  
  199. > Date: Thu, 19 Aug 93 06:32:33 PDT
  200. > From: deraud@power.amasd.anatcp.rockwell.com (Robert Lee DeRaud)
  201. > Subject: Bank-switching redux
  202. > Message-ID: <9308191332.AA06515@power.amasd.anatcp.rockwell.com>
  203. >
  204. [...] 
  205. > Doesn't the GM standard already implement bank switching or is this just 
  206. > a GS (Roland-only) thingy? Note that the controls to handle it are 
  207. > already in Recording Session. This sure looks like a convenient place to 
  208. > hook this stuff in without breaking a lot of existing S/W.
  209.  
  210. GM has only one patch bank, so no specifications for bank switching under 
  211. that standard.  Recording Session supports GS bank switching, but since 
  212. there aren't any GS synths that require patch caching, I'm not sure
  213. if the sequencer will take bank switch messages into account when caching
  214. patches. 
  215.  
  216. > Date: Wed, 18 Aug 93 08:34:03 EDT
  217. > From: ciabatto@esc.syr.ge.com (David Ciabattoni)
  218. > Subject: Cakewalk out?
  219. > Message-ID: <9308181234.AA19101@escsyr.esc.syr.ge.com>
  220. >
  221. [...] 
  222. > Also, I bought a crap joystick a year ago and now since I have some time
  223. > to play games want a REAL joystick that works well with Gus and the
  224. > Ultrajoy port/software. Can some of you send me the names of the 
  225. > joystick you use and if you like/do NOT like it, so I don't waste my
  226. > money again. (Ill collect and post a list of my findings is there is
  227. > not already a list floating around.)
  228. >
  229.  
  230. I like my CH Flightstick for games that require proportional control,
  231. such as flight simulators, while my Gravis Gamepad comes in handy for
  232. fast-reflex type arcade games.  Both feel great in the hand, and both
  233. are built to last.
  234.  
  235. > Date: Thu, 19 Aug 93 09:16:53 EST
  236. > From: David Mitchell <davidm@hparc1.aus.hp.com>
  237. > Subject: GUS and Syndicate sound - the solution!
  238. > Message-ID: <9308182318.AA28444@hp.com>
  239. > Some time ago I asked how to get digitized sound working with Syndicate -
  240. > music worked without a worry, but sounds were "off".
  241. > Last night I stumbled on a solution (courtesy of one of my workmates with a
  242. > PAS-16, who had the same trouble):
  243. > - YOU NEED TO SET THE INTERRUPT IN BOTH THE BLASTER AND ULTRASND VARIABLES TO
  244. >   7 (AS OPPOSED TO 5)
  245. >
  246.  
  247. Or, you could just run main.exe with /iirq5.  My GUS' SB IRQ is on 5, and 
  248. the game works just fine.  It assumes the defaults if you don't supply it 
  249. with soundcard settings.  However, I can't get it to parse /iio$<address>
  250. switches correctly, so I have to leave my GUS on 220h.
  251.  
  252. > Date: Wed, 18 Aug 1993 10:55:39 +0200
  253. > From: Guido.VanDenBerghe@esat.kuleuven.ac.be
  254. > Subject: Maestro 16 sound card
  255. > Message-ID: <9308180855.AA12100@updike.esat.kuleuven.ac.be>
  256. > Hi All,
  257. > A few days ago I bought a MAESTRO 16 sound card.
  258. >
  259. [...] 
  260. > I was mainly interested in the aria synthesizer.  It sounds
  261. > AWESOME,  even my old MT32 sounds better.  I also have a Roland E-70 
  262. > (Sound Canvas).
  263. [...]
  264. > Everything on the Maestro 16 sound card is good, except the sound of the
  265. > ARIA synthesizer!  If you want a card with a good scsi (e.g. better than a
  266. >
  267.  
  268. Did you mean to say "awful" instead of "awesome"?  Otherwise, your message
  269. lacks coherence. :)
  270.  
  271. > Date: Wed, 18 Aug 93 11:08:00 PDT
  272. > From: "Tamashiro, Joey" <joey%spencer@uunet.UU.NET>
  273. > Subject: SBOS option parameters for Willy Beamish?
  274. > Message-ID: <2C7270BE@felix>
  275. > Anyone out there have the CD game "Willy Beamish"?  Before I start 
  276. > experimenting to find the right combination which works, I thought someone 
  277. > might have already gone through this excercise.
  278. > The problem is with the speech.  Most speech segments cut out portions and 
  279. > also repeat portions like there is an echo.  Thanks.
  280. >
  281.  
  282. Does this happen with any other games besides Willy Beamish?  If so,
  283. try using SBOS 1.20 (on Epas).  The newer SBOSes don't handle the DAC
  284. emulation properly on some machines.
  285.  
  286. If the choppy sounds only arise when playing off the CD-ROM, try changing
  287. the DMA channel of your GUS to an 8-bit one if it's currently using a
  288. 16-bit DMA channel.
  289.  
  290. Also, check to see that the IRQ and DMA of the CD-ROM controller aren't
  291. conflicting with any IRQ's or DMA's on the GUS.
  292.  
  293. Phat.
  294.  
  295. ------------------------------
  296.  
  297. End of Ultrasound Daily Digest V5 #19
  298. *************************************
  299.  
  300. To post to tomorrow's digest:                        <ultrasound@dsd.es.com>
  301. To (un)subscribe or get help:                <ultrasound-request@dsd.es.com>
  302. To contact a human (last resort):              <ultrasound-owner@dsd.es.com>
  303.  
  304. FTP sites:                archive.epas.utoronto.ca         pub/pc/ultrasound
  305.                           wuarchive.wustl.edu       systems/msdos/ultrasound
  306.                           archive.orst.edu               pub/packages/gravis
  307. FTP mail server:          mail-server@nike.rz.uni-konstanz.de
  308.  
  309. Hints:
  310.       - Get the FAQ from the FTP sites or the request server.
  311.       - Mail to <ultrasound-request@dsd.es.com> for info about other GUS
  312.         related mailing lists (UNIX, OS/2, GUS-MIDI, etc.)
  313.  
  314.  
  315.